Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: CLIVEDONNISON on September 01, 2021, 04:41:46 am

Title: pole pressure
Post by: CLIVEDONNISON on September 01, 2021, 04:41:46 am

On two pole water fed system........one pole is only getting a small trickle of water from one of the jets and the other is fine..........I have tried clearing the jet but the same,I have also bought a new brush with new jets and still the same.
Any ideas?
Many thanks

Title: Re: pole pressure
Post by: Pete Thompson on September 01, 2021, 08:32:42 am

You might have a small stone jammed in the Y-piece, or somewhere else in the pole hose.

Title: Re: pole pressure
Post by: Jonny 87 on September 03, 2021, 10:58:47 pm

Are you running two seperate pumps? Seperate Reels etc?

If so, it could be one pump is on the way out.

Title: Re: pole pressure
Post by: windowswashed on September 04, 2021, 09:51:39 am

Run two pumps. Running one pump for two poles isn't great as the pressure will drop when both poles are drawing water.