Pages: [1]

keith b

  • Posts: 375
Pressure Washer Advice Needed
« on: April 28, 2004, 03:21:22 am »
Hi all,

What is the maximum length of pressure washer hose you can use with a 200 bar/3000+psi machine with a flat surface washer attachment?, as i have a diesel  engine cold water pressure washer that has yet to be mounted in a van or trailer (cos of weight etc) as i was wondering what the pros & cons are of this set up?, especially trying to clean patios in houses that don`t have outside rear or side access!
Any advice is much appreciated!. ???  
Logged

cleanmachines

  • Posts: 4
Re: Pressure Washer Advice Needed
« Reply #1 on: April 30, 2004, 02:38:40 pm »
As a rough guide up to 30M of hose will see you lose negligable performance.

Any more than 30M and performance drops .


Hope this helps.
Logged

wreelyclean_servic

Re: Pressure Washer Advice Needed
« Reply #2 on: May 02, 2004, 12:54:13 am »
;D ;D ;D...I regularly use up to 60/80 mts of hose with my steam cleaners and rotary cleaner and don`t see any loss of performance...

Maybe it is down to which hose you use??

I just know that all my hoses are about 1/2 inch thick and work just fine....

Have Fun.... Locko ;) ;)
Logged

keith b

  • Posts: 375
Re: Pressure Washer Advice Needed
« Reply #3 on: May 03, 2004, 02:27:54 am »
Thanks all
Logged

scottish

  • Posts: 21
Re: Pressure Washer Advice Needed
« Reply #4 on: August 03, 2004, 07:58:59 pm »
any suggetions on where to buy power washing equipment?
Logged

cleanmac

  • Posts: 104
Re: Pressure Washer Advice Needed
« Reply #5 on: August 04, 2004, 03:14:34 am »
Scottish

I recommend Viking Services in Newburgh Fife (01337 842156).Topnotch service!

David
Logged

Alex

  • Posts: 232
Re: Pressure Washer Advice Needed
« Reply #6 on: August 04, 2004, 03:19:43 am »
Make sure your hose is 400bar pressure tested
Logged
Pages: [1]