Hi Guys
I had the guy for Dry Fusion come over today to carry out a demo clean at some empty offices I was cleaning.
Just out of interest I suggested we both cleaned to make a comparison.
He ran the DF along one half of the office while I cleaned the other half with CFR (the carpet is synthetic Huega tiles).
I carried out a pre-spraying with Solutions No 2 and clear water rinse.
He used DF restore pre-spray then activator on his pads.
Results were DF dried within 30-45 minutes and the tiles were impressivley clean and it was much faster with much less effort.
CFR performed well but the tiles on my half were still damp on leaving after 2hrs, while the appearance of the clean was acceptable, side by side I would have to say Dry Fusion out performed.
The other thing that struck me was the smaller amount of kit carried, the CFR took some lugging
up two flights of stairs and along with the hoses,buckets,sprayers,wands,Sebo & chemicals etc it looked like I had three times the amount of kit, to carry out the same job.
I think I will be joining the ranks of the Fusioneers before to long