Pages: [1]

Dave Willis

Taps
« on: August 15, 2016, 07:58:00 pm »
Seem to be eating my way through my supply cupboard - is it just me?
Logged

DeLuce

  • Posts: 1153
Re: Taps
« Reply #1 on: August 15, 2016, 10:30:51 pm »
Hi Dave, I used to use those taps, but went tubeless with the Ex-ceed system, blue pole hose and univalve and I think it's the best set up I've tried. You should give it a go and see what you think!!
Logged

Smurf

  • Posts: 8538
Re: Taps
« Reply #2 on: August 15, 2016, 10:42:20 pm »
Try em on a belt instead of dragging them along the floor
Logged

Dave Willis

Re: Taps
« Reply #3 on: August 15, 2016, 10:43:52 pm »
Erm they are always on a belt  ;D
Logged

Smurf

  • Posts: 8538
Re: Taps
« Reply #4 on: August 15, 2016, 10:51:01 pm »
 Was just a suggestion  ;D ;D
Logged

Positivity

  • Posts: 571
Re: Taps
« Reply #5 on: August 16, 2016, 01:00:40 pm »
Can you put one of the black handles on the one without?
I see one has the red insert and the "springy bit" has gone - impossible to get back in I've tried.
Use the John Guest 8mm x 6 mm barb and attach the pole hose to that.
With those fitted (they are harder plastic) and tend not to  pull the red insert and "springy bit" out as much as the pole hose does, the hose is softer and the teeth dig in a lot more.
Logged

Smurf

  • Posts: 8538
Re: Taps
« Reply #6 on: August 16, 2016, 02:07:12 pm »
It's normally a small bolt/screw that holds the tap handles on that can work loose which tends to fall out and gets lost. Just take them out, apply locktight on the threads and put the screw back in so less chance of working loose again. If they are the same type the tap handles can indeed be swapped over easily.
Logged

SB Cleaning

  • Posts: 4237
Re: Taps
« Reply #7 on: August 16, 2016, 02:48:37 pm »
Just buy a univalve Dave you will never look  back ;)
Logged

Smurf

  • Posts: 8538
Re: Taps
« Reply #8 on: August 16, 2016, 02:51:12 pm »
Quote from: SB Cleaning on August 16, 2016, 02:48:37 pm
Just buy a univalve Dave you will never look  back ;)

That's until it jams and stops working that is...what are yer going to do then?  ;D
Logged

steven jonesg

Re: Taps
« Reply #9 on: August 16, 2016, 05:05:19 pm »
Quote from: Smurf on August 16, 2016, 02:51:12 pm
Quote from: SB Cleaning on August 16, 2016, 02:48:37 pm
Just buy a univalve Dave you will never look  back ;)

That's until it jams and stops working that is...what are yer going to do then?  ;D

The best thing to do smurf, is send me an email
if there is a fault, i will replace it.
To be fair, they will not jam, if it did, it would be a fault on assembly.

Steven.
Logged
Pages: [1]