Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on March 25, 2018, 11:51:21 am
-
https://youtu.be/QbHFk1DwUcI
(https://scontent-syd2-1.xx.fbcdn.net/v/t31.0-8/29060202_10216035981040750_3189399088424954613_o.jpg?_nc_cat=0&oh=f12e11b95a4cec363040bfa570269584&oe=5B44770F)
-
https://youtu.be/QbHFk1DwUcI
(https://scontent-syd2-1.xx.fbcdn.net/v/t31.0-8/29060202_10216035981040750_3189399088424954613_o.jpg?_nc_cat=0&oh=f12e11b95a4cec363040bfa570269584&oe=5B44770F)
Who made that? I'm guessing your Grandkids made it!
-
What is it good for? I can't imagine that it's very effective on frames.
-
thats terrible :D
get an old brush head, cut the bristles off and glue/velcro/cable tie/tape a piece of scrubbing pad on
hey presto you have a superdoodlebug
-
What is it good for? I can't imagine that it's very effective on frames.
What are you good for?
-
So what do you guys use to scrub dirty glass when you water fed brush doesn't clean properly?
-
Or you could use this one notice scrub and rinse in one go.
This scrubs the frame as well as any.
Scrubbing side ways easier then up/down motion.
Work easy not hard.
https://youtu.be/tFeQ9xCYSAQ
(https://scontent-syd2-1.xx.fbcdn.net/v/t31.0-8/22338911_10216027865917877_5051577999462039493_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHUCYQ4-pnPdRIIxT5PDcR8nf5LD4Yhbc6TAfyDmx0NbADyN3bpeMIZ0_FvNwRtEXyNbltEdrdSPys5jDIKa3uVIAuAC_oIWpki1BycXDCLoA&oh=0b8602737242ed85e3ea001239b61ecb&oe=5B2705F0)
-
I use a Gardiner's scraper plastic thingy with a scrub pad on.
Or the edge of the brush head.
The problem with these 2 is you would have to take the brush off to swap it over then back again....that's far too much fannying to clean windows .
-
The problem with these 2 is you would have to take the brush off to swap it over then back again....that's far too much fannying to clean windows .
You can use ether one by it self, without swapping around.
-
hot water and ubik2000 does it for me on 90 percent of first cleans unless its covered in paint ect then its ladder off with paint scraper , i think its hard to beat getting up there face to face and giving the glass a good scrape