Pages: [1]

george renwick

  • Posts: 35
Di vessel can they go wrong
« on: June 17, 2018, 03:11:22 pm »
I use two vessel system and the first one is only reading 4  but the second in l one keeps coming out at 1 or 2  .Is there anything inside them that can go wrong and needs to be replaced  ??? ??? ???
Logged

Shrek

  • Posts: 3931
Re: Di vessel can they go wrong
« Reply #1 on: June 17, 2018, 03:44:40 pm »
Could be your tds meter? Is it a cheap one off eBay?
Logged

JandS

  • Posts: 4232
Re: Di vessel can they go wrong
« Reply #2 on: June 17, 2018, 08:00:07 pm »
Not necessarily off e bay I've had one from a reputable supplier that reads wrong........
Logged
Impossible done straight away, miracles can take a little longer.

JandS

  • Posts: 4232
Re: Di vessel can they go wrong
« Reply #3 on: June 17, 2018, 08:01:57 pm »
Altogether I have 3...all the same make and not one of them reads correctly with the calibration fluid....probably the fluid although that was from supposed reputable supplier.
Logged
Impossible done straight away, miracles can take a little longer.

Slacky

  • Posts: 7633
Re: Di vessel can they go wrong
« Reply #4 on: June 17, 2018, 08:59:03 pm »
The riser tube can either be loose or leak, maybe from a crack in it. This can mean water bypassing the resin leading to contaminated water.
Logged

dazmond

  • Posts: 23571
Re: Di vessel can they go wrong
« Reply #5 on: June 17, 2018, 09:00:23 pm »
Quote from: madferrit on June 17, 2018, 03:11:22 pm
I use two vessel system and the first one is only reading 4  but the second in l one keeps coming out at 1 or 2  .Is there anything inside them that can go wrong and needs to be replaced  ??? ??? ???

Its obvious.......your second vessels resin is spent....
Logged
price higher/work harder!
Pages: [1]