Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: peekeclean on November 13, 2017, 06:17:45 pm
-
Help please just changed setting on the digital vairstream as i find setting 3 to much pressure so iv moved to 2 and this one plays up after 30sec. The stream of water is starting and stopping,now i can't seem to get the adjustment right. any help would be great and what settings you use please?
thanks joe
-
I think I had this with air in the pump or system or a blockage somewhere,it cycles like this this time of the year also if you have a cold setup and the jets get blocked.
-
Unless you need to adjust your cal setting.
-
Help please just changed setting on the digital vairstream as i find setting 3 to much pressure so iv moved to 2 and this one plays up after 30sec. The stream of water is starting and stopping,now i can't seem to get the adjustment right. any help would be great and what settings you use please?
thanks joe
Unless you need to adjust your cal setting.
Exactly NWH.
3 and 2 on the front screen are flow settings and have nothing to do with pressure.
You need to raise the dead end settings a bit.
Instructions below.
-
Thanks guys now what setting do you use it on?
-
Trial and error really with a varistream but from your symptoms you need to increase it from what you already have it set to
-
i wil have a play today with it. thanks
-
Thanks guys now what setting do you use it on?
The factory setting is C.
-
Pressure 7 in summer 8 in winter and flow 2 sometimes 3.
-
this is starting to give me the hump. im on number 2 today and tryed pressure settings 7,8,9,a,b and it keeps slowing to a trickle (when you turn the brush on its side the jet is about 4" from the brush). Turn it to number 3 and it is on pressure setting 7 and its about 14" from the brush. my brush has 2x 2mm jets.
-
this is starting to give me the hump. im on number 2 today and tryed pressure settings 7,8,9,a,b and it keeps slowing to a trickle (when you turn the brush on its side the jet is about 4" from the brush). Turn it to number 3 and it is on pressure setting 7 and its about 14" from the brush. my brush has 2x 2mm jets.
Please make sure all your electrical connections are secure. Then make sure that your hose hasn't any kinks and that there are no other restrictions. We had an issue with one of those Hozelock stop valves on the hose reel Suddenly, after working perfectly for 6 months decided to only partially open.
A new Varistream is set on C. We used to push it up to D in the winter. Sometimes it can be easy to get the first screen instead of the second when adjusting the pressure. You have to first start the pump running by switching the Varistream on. Then with the water flowing press the + & - buttons together for 3 seconds. The pressure digit or letter should come up on the screen. Then press the + & - again to get the digit/letter to flash. Use the + button to raise pressure settings; - to lower it. (The lowest setting is 1 the the highest setting is F.) Once you've got there then switch the Varistream off. That saves and stores the setting you have made. Switch the unit back on.
In the early days I sometimes battled to get it adjusted correctly. Just watching the screen whilst the controller is working tells you alot.
.