Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: beefy on August 19, 2006, 08:10:12 pm
-
my gardiner pole hose has a small brass connector which fits into the hose of the bpack i want to change it all to fit hozelock but i cant find a way of fitting the pole hose to a hozelock fitting does any one else have hozelock on their pole
baffled with a headache ???
-
I use one of these attached to the thin hose from my brush head:
http://www.cleantech.co.uk/catalog/product_info.php?cPath=22_40&products_id=75
It fits into a female hoselock.
Does that answer what you were asking?
-
Hi Beefy,
all of our poles can be specified from new with a choice of end connectors, one of which is a standard lightweight nylon male hozelock connector.
Alex
-
thanks tosh,
alex i chose 1 that would fit bpack it never occured to me to get the 1 you mentioned still live& learn eh!! can i cut off the 1 i have & fit the nylon male hose connector
-
yes
-
alex yr a godsend
so i need a lightweight nylon male hose connector,
i also need a connector from my bpack hose to a female hoselock, my hose id is 8mm do you have them as well
-
The nylon male hozelock type fitting is actually about 7mm ID on its fitting so it fits both 6mm and 8mm hose.
To fit it onto the 6mm ID hose you have to dip the end of the hose into boiling water for about 5 seconds, but to fir into 8mm ID you just need to make sure you fully tighten the jubilee clip/'o' ring.
Alex