[Miko67]

I'm  just starting out,  going to get a pressure washer - to be a addition to my  already existing one man band window cleaning round. 
Was looking at the hyundia 2800 psi for using maybe 2/3 times a week. It says it's not for commercial use but I'm wondering if any others have used it for part time additional services.
Thanks.

[Smurf]

I started out having a play with a second hand ryobi pressure washer with a similar spec as that. https://www.amazon.co.uk/d/Pressure-Washers-Accessories/Hyundai-2800-Portable-Petrol-Pressure-Washer-HYW2500P/B00M417WE0

It did the job but took hours to do block paving compared to a better spec washer. Not to mention as it's a direct feed washer will drive you nuts if the outside tap flow is poor as won't build up to full pressure/flow.

You would be better off to get a decent spec washer straight away than mess about with something like that.

[Miko67]

Thanks smurf , just the cash flow. Maybe get a second hand one then would you think? That's a better psi ?

[Smurf]

Might be worth speaking with Ben at rutlandpumps as maybe able to sort you out with a decent  used washer.
Min spec you should be looking at for block paving cleaning is 200 bar 15 lpm interpump that draws from a buffer tank. Anything better lpm wise will be a bonus as for instants a 21 lpm will be a lot quicker especially on larger areas. Word of warning best stay well clear of cheap china crap as the motors also the pumps for that matter will last 5 mins.

[Miko67]

Thanks mate. Appreciated. I'll give  it a look;-)

[M Roberts]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

[Miko67]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

Glasgow

[M Roberts]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

Glasgow

Ok then that's a tad far 

[Richard 01903]

im looking for a secondhand set up in Sussex

[Don Simon]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

How much ?

[M Roberts]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

How much ?

£500 will stick on flee bay when I get a chance

[Richard 01903]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

How much ?

£500 will stick on flee bay when I get a chance

Where  are you based please as looking for a start up kit 

[M Roberts]

Where are you based ?
just swapping over a Loncin for another diesel, mounted on trolley runs Ar pump 18ltrs /  200 bar, electric start if you are interested

How much ?

£500 will stick on flee bay when I get a chance

Where  are you based please as looking for a start up kit 

Bedfordshire mate, will be totally honest m/c has a small oil leak on main engine seal, doesn't effect performance just something to be aware of. its been like it for around  6 mths  we use it van based so not an issue.
Hence realistic selling price