[*Derek*]

I must wash the pvc on this building. As i'm realitively new to the cleaning scene what suggestions would you have for reaching it?

[CLEANGLASSUK]

Have you got a picture.

[*Derek*]

Crappy Crap Crap i forgot to post it....

Here it is?

[CLEANGLASSUK]

With a bit of mesing about you should be able do it using wfp, 45ft. Might even have to use 60ft.

[richywilts]

hire a boom or scissor lift if u have ipaf!! so u could get better access

[geefree]

should have that done in 30-45 mins with a 35ft pole.

well thats my opinion anyway. 

[CLEANGLASSUK]

I would probably charge around £50-60 for that,no money if you have to hire scissor lift, unless you charge £150 or so

[Oakley Windows]

Thats on the continent isnt it?

[CLEANGLASSUK]

should have that done in 30-45 mins with a 35ft pole.

well thats my opinion anyway. 

Dont think 35 will reach as you would have to stand in road to reach far corner's.

[*Derek*]

Thanks for feedback lads, Would i need a ledge extension to get to back of facia? Its in about 5 feet or more from edge of roof?

[CLEANGLASSUK]

Using a 60 pole standing in the road should just reach.Just do a test first before you start to make sure, Otherwise you would probably need scissor lift or platform, then the quote will be a lot higher.

[seandyer2003]

Thats on the continent isnt it?

Ireland that, looks like every irish village there is multicoloured buildings, they always paint them different colours in thetowns

[Alex Gardiner]

Cherry picker would be the easiest and most efficient way. About £100-150 for a couple of hours hire with an operator.

[*Derek*]

thanks again lads,

I cleaned out the gutter using my omnivac. There was even a sod in it.. I powerwashed the gutter and front of building and now i only have them 3 window and facia's left to do. I will try the wfp and if that fails i'll get the cherry picker. I use a 40t cherry picker from time to time and to be honest there useless.. You need bigger...