Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on January 23, 2021, 06:49:17 am
-
You could also connect it to other Bucket On A Belt set ups.
Make using scrubber/ squeegees easy.
No more twisting around trying to grab your squeegees or scrubbers.
Check the newly designed Scraper Holster which we are using in the video.
https://www.youtube.com/watch?v=VqlwmjVDorE
-
In my next clip, I show blind folk how to stay safe when crossing the railway line.
Always listen for the whistle or the hiss of steam.
-
Another easy way to get plays on his YouTube channel I didn’t bother clicking.
-
Another easy way to get plays on his YouTube channel I didn’t bother clicking.
Your loss. ;D 8)
-
Also you would seen in video that we have resigned the the scraper blade holster see how easy and safe it is now to use your scraper.
;) ;D ;D ;D
-
Oh dear hear we go again trying to re invent the wheel :'(
-
And where is the link to this latest game changer ?
-
Oh dear hear we go again trying to re invent the wheel :'(
Not at all trying to make it easier and simpler way to do Window Cleaning.
However some people don't get it and don't even check it out. ::)roll ::)roll ;D
These always an easy way of doing things ( Work easier not harder.)
-
And where is the link to this latest game changer ?
Noooooooo, don’t encourage him ;)
-
And where is the link to this latest game changer ?
https://www.youtube.com/watch?v=VqlwmjVDorE
-
What would he do if they ever ran out of cable ties
-
Check the newly designed Scraper Holster which we are using in the video.
https://www.facebook.com/photo/?fbid=10225138518838506&set=a.10225138522718603
-
Every post has a YouTube link it’s a carrot for clicks,I’m all over your case Herman,if it’s any good people might look.
-
Also you would seen in video that we have resigned the the scraper blade holster see how easy and safe it is now to use your scraper.
;) ;D ;D ;D
You resigned or the scraper blade holster resigned? I know who my money is on.
I reckon you've done a deal with a cable tie manufacturer, H MAN.
On yer, wild man!
-
Every post has a YouTube link it’s a carrot for clicks,I’m all over your case Herman,if it’s any good people might look.
Yes would of put a picture up here as what normally do.
But seems it not possible to put them up here anymore.
This is why we have do this.
-
Also you would seen in video that we have resigned the the scraper blade holster see how easy and safe it is now to use your scraper.
;) ;D ;D ;D
You resigned or the scraper blade holster resigned? I know who my money is on.
I reckon you've done a deal with a cable tie manufacturer, H MAN.
On yer, wild man!
If you know a better way to attach it and have that angle like to see how you would of done it.
As for the newly designated scraper blade holster.
Makes the other branded name one not look very safe.
-
Every post has a YouTube link it’s a carrot for clicks,I’m all over your case Herman,if it’s any good people might look.
Yes would of put a picture up here as what normally do.
But seems it not possible to put them up here anymore.
This is why we have do this.
This is a picture. Coincidentally it is also an australian cock.
(http://www.cleanitup.co.uk/smf/1611477078_6A96B38B-C90B-4768-9D9C-40396BFB508B.jpeg)
-
Every post has a YouTube link it’s a carrot for clicks,I’m all over your case Herman,if it’s any good people might look.
Yes would of put a picture up here as what normally do.
But seems it not possible to put them up here anymore.
This is why we have do this.
This is a picture. Coincidentally it is also an australian cock.
(http://www.cleanitup.co.uk/smf/1611477078_6A96B38B-C90B-4768-9D9C-40396BFB508B.jpeg)
That's normal we all have big C#%@ ;D ;D
-
It's the safest one by far.
https://youtu.be/lB00bCfS23Q
-
are all the others you made dangerous then ....
Darran
-
are all the others you made dangerous then ....
Darran
Which ones are you talking about??
-
It's the safest one by far.
https://youtu.be/lB00bCfS23Q
so your other efforts were dangerous ?
Darran
-
It's the safest one by far.
https://youtu.be/lB00bCfS23Q
so your other efforts were dangerous ?
Darran
Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around. ::)roll ::)roll ::)roll
Classic example Sorbo has just change there channels to thinner channels after how many years doing wide body channels.???
Although they still keeping the wide body channels which now have a new mod on them and will be release soon. ;) ;) ;D ;D
-
It's the safest one by far.
https://youtu.be/lB00bCfS23Q
so your other efforts were dangerous ?
Darran
Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around. ::)roll ::)roll ::)roll
Classic example Sorbo has just change there channels to thinner channels after how many years doing wide body channels.???
Although they still keeping the wide body channels which now have a new mod on them and will be release soon. ;) ;) ;D ;D
Yep still waiting...
-
It's the safest one by far.
https://youtu.be/lB00bCfS23Q
so your other efforts were dangerous ?
Darran
Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around. ::)roll ::)roll ::)roll
Classic example Sorbo has just change there channels to thinner channels after how many years doing wide body channels.???
Although they still keeping the wide body channels which now have a new mod on them and will be release soon. ;) ;) ;D ;D
Yep still waiting...
Think your bit confused said nothing about how dangerous this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.
-
Think your bit confused said nothing about how dangerous this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.
Is this English or Australian?
-
Think your bit confused said nothing about how dangerous this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.
Is this English or Australian?
If you talking about the video you will notice it has subtitles in English ;)
-
I was confused by your engineering prowess 7mm drill or digger than 1/4" how much bigger ? why not give the English equiv.
9/32 or letter K size drills.
your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round
Darran
-
I was confused by your engineering prowess 7mm drill or digger than 1/4" how much bigger ? why not give the English equiv.
9/32 or letter K size drills.
your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round
Darran
It might be because it's in Australian and upside down.
-
I think you right 😂😂
-
Yet another one :o :o :o :o ;) :D ;D
https://youtu.be/LLxVsC6lH30
-
I was confused by your engineering prowess 7mm drill or digger than 1/4" how much bigger ? why not give the English equiv.
9/32 or letter K size drills.
your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round
Darran
It might be because it's in Australian and upside down.
It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30
(http://www.cleanitup.co.uk/smf/1612011301_SCRAPER HOLSTER.4.jpg)
-
I was confused by your engineering prowess 7mm drill or digger than 1/4" how much bigger ? why not give the English equiv.
9/32 or letter K size drills.
your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round
Darran
It might be because it's in Australian and upside down.
It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30
(http://www.cleanitup.co.uk/smf/1612011301_SCRAPER HOLSTER.4.jpg)
Definitely not interested - not because its a bad idea OR because I have no use for one - YOU have no pride it what you produce - you don't de-burr the edges, smooth out the slots - its a mess - when I make stuff it may not be perfect but at the very least I make look presentable
Darran
-
And this is how it started out.
(https://www.dropbox.com/s/q1u69bganf6j658/Photo%2030-01-2021%2C%2015%2058%2053.jpg?raw=1)
-
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30
For the people that are interested here's a PDF "SCRAPER HOSTER TEMPLATE " will see it bottom left comer of this page after clicking link, YOU CAN THEN PRINT IT
The video will show you how to make it.
https://cdn.fbsbx.com/v/t59.2708-21/142569621_2487120621596787_7920241568524739865_n.pdf/IMG_20210129_0006.pdf?_nc_cat=109&ccb=2&_nc_sid=0cab14&_nc_ohc=lLcaDKXrB_wAX8CngED&_nc_ht=cdn.fbsbx.com&oh=9c5510fe69d26c063555fb8f1e773a87&oe=601753F5&dl=1
(http://www.cleanitup.co.uk/smf/1612011301_SCRAPER HOLSTER.4.jpg)
[/quote]
-
Being an Aussie doesn't mean you have to follow in your fore-fathers footsteps.
Are you seriously trying to say thats a quality piece of engineering and is likely to attract the eye of an investor looking to get in on the window cleaning side of business? Cos I tell you what, if you think thats worth a punt you're as crooked as Ned Kelly.
-
I don't believe this! Halfway through the video, its like watching Blue Peter.
(http://www.cleanitup.co.uk/smf/1612043449_pikey holster template.jpg)
-
I was confused by your engineering prowess 7mm drill or digger than 1/4" how much bigger ? why not give the English equiv.
9/32 or letter K size drills.
your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round
Darran
It might be because it's in Australian and upside down.
It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30
(http://www.cleanitup.co.uk/smf/1612011301_SCRAPER HOLSTER.4.jpg)
Definitely not interested - not because its a bad idea OR because I have no use for one - YOU have no pride it what you produce - you don't de-burr the edges, smooth out the slots - its a mess - when I make stuff it may not be perfect but at the very least I make look presentable
Darran
It is a how to do video show's the basic way to make it.
Of cause once you have made it, you can put your own finishing touch's on it.
Most people would know to do this.
Called common sense.
-
But why aren't YOU!!!!!!!!
Darran
-
So made another way of putting the clip at an angle.
This will easier to get your tools out of the BOAB as it sits at an angle when on your belt.
Much easier to attach to the BOAB as well.
(http://www.cleanitup.co.uk/smf/1612479069_CLIP ON SQUEEGEE CHANNEL HOLDER.2.jpg)