[Lee.]

Please excuse me if I sound a little daft but why are upvc downpipes not used for gutter vacuuming? Is it because they are too heavy or brittle? I do not use a gutter vacuuming system but would love to put one together as cheaply as possible. I have absolutely no experience whatsoever but am very intrigued.

regards Lee

[ray mck]

I was thinking the same thing, about bathroom waste pipes 40m or 50m and cheep.

[Lee.]

My thoughts precisely!

[robert mitchell]

it has been done before by somebody on here , can't remember who .

[Lee.]

Thanks Robert,

Do you know what the result was?

[Smudger]

Brewers droop.


Try holding a 3 meter length of waste pipe and see how stable it is...


Darran

[Lee.]

Thanks Darren.

[slap bash]

I use  UPC tubes and the get brittle in the cold winters as well as droopy and imposable over first floor. I have used my slx with a flexible hose with a upvc  pipe on the top so its is exposed on the outside of the pole. I never use the top section to lift the vac hose but start on the sec 2 to provide strength.

[Dave.]

Here was the post from a few years back

http://www.cleanitup.co.uk/smf/index.php?topic=123451.0

[Clever Forum Name]

We tried it and was a nightmare. The wobble was awesome lol.

If you make each section really short it may work. But then I wouldn't want to spend 2 hours setting up a pole lol

[stu_thomson]

Just get one of these and be done with it cheap as chips

http://www.guttercleaningsystems.co.uk/clarke20.html

[Avo]

Don't waste your time and energy putting waste pipes together your gonna look aright plum at a customers house having a half hearted attempt at cleaning them 

Might seem a lot to lay out the cost on poles but it soon pays for its self.

 If you wanna do diy and save money then try doing carbon fishing poles instead.

[CleanClear]

Someone off here (can't remember who), think it may be someone who does pressure washing uses clear plastic poles. Seem better as you can see if there's a blockage and they seem rigid. I'll see if i can find the video of it.

[Smurf]

You will soon know if you have a blockage or the vac is full as the tone of the vac motors will change. Also if you have a gopro on the pole you can see what you are doing too.

Clear plastic guttervac poles would not last five mins and is a stupid idea if you ask me

[Plankton]

Don't waste your time and energy putting waste pipes together your gonna look aright plum at a customers house having a half hearted attempt at cleaning them 

Might seem a lot to lay out the cost on poles but it soon pays for its self.

 If you wanna do diy and save money then try doing carbon fishing poles instead.

You've gave me an idea. Sell my fishing gear instead of wfp equipment to buy gutter vac/poles.

[Frankybadboy]

The cowboy called Trippy uses drain pipepoles

[Avo]

You will soon know if you have a blockage or the vac is full as the tone of the vac motors will change. Also if you have a gopro on the pole you can see what you are doing too.

Clear plastic guttervac poles would not last five mins and is a stupid idea if you ask me

yes smurfs right they might last 10 jobs if your lucky they must be able to withstand and knock here and there. Go pro cam are great idea to so you can see what's what while cleaning.

https://m.youtube.com/watch?v=2bPfdyn_XsY

[Spruce]

Brewers droop.


Try holding a 3 meter length of waste pipe and see how stable it is...


Darran

 

[Avo]

Nozzles are worth making from plastic as you can heat them up and shape them to your needs, I did some about 18 months ago if you search through old posts on here.

[Smudger]

Nice piccy surf


The clear acrylic tubes seem to be used in the usa, they would be quite rigid, but heavy as with most stuff things evolve, with go pro etc it's really easy to see what's going on, theses were not available a few years back.  And now you can get a set of poles for very little money which really kills off any effort to DIY a set


Darran