WCS Limited

  • Posts: 157
Essex Rounds For Sale
« on: September 25, 2012, 02:09:31 pm »
Hi Guys,

I have two rounds for sale both in the Essex area and have been established for well over 12 to 18 months.

I am selling these as i am deciding to move into other things. The work itself is well priced with no under priced work or time wasters, the work is based upon monthly intervals rather than 4 or 8 weekly (this could be changed if required but this would need to be done by the individual who buys it)

I have set out below the two monthly taking's taking in to consideration bi monthly customers.

Chelmsford Round
  • Month 01 = £527.00
  • Month 02 = £518.00


Colchester Round
  • Month 01 = £542.00
  • Month 02 = £535.75

Great Leighs Round
  • Month 01 = £139.50
  • Month 02 = £129.50

Fortnightly Commercial (two contracts) = £113.75
                               
Month 01 Round Total £1436.00

Month 02 Round Total £1410.75
(The above totals are taking into account two visits of the fortnightly commercial contracts)

This does not include any quarterly or yearly cleans that are included within this. There is also the opportunity to clean from time to time any required builders cleans within a large commercial site in Colchester. These are priced correctly and the last 10 houses where cleaned and over £400 charged.

Offers accepted around the £7000.00 mark, i am looking for just under five times the value, this is good solid work with bags of potential.

I will soon also be putting up for sale, once the round is sold my 2006 Dispatch 900 enterprise with onboard 600 litre 4040 system.

I anybody wishing to discuss the round details further and want to contact me, I am available via CIU or on 07789-223344 thanks Scott

SB Cleaning

  • Posts: 4231
Re: Essex Rounds For Sale
« Reply #1 on: September 25, 2012, 02:31:00 pm »
Is it a diy system in the van and is the van hdi ?

Thanks

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #2 on: September 25, 2012, 02:45:44 pm »
its not a diy, but i have installed it myself. Its a purefreedom frame, tank & ro frame, but has the gaps water stainless HF5 4040 and smaller pre filters with 100psi shurflo and cleaning warehouse controller. There is also a Fogwash installed with safefill gas bottle and a cox reel with 100meters of gardiners 6mm thermobore.

it is the 900 2.0 hdi (last of the old face lift model) i think it now has around the 98k mark ive put around twenty on it in the last 18 to 24 months (since i've owned it), it will be serviced and cambelt changed before it goes but will reflect this in its price.

it is a pucka bit of kit but i wont be able to sell it until the round has gone.

SB Cleaning

  • Posts: 4231
Re: Essex Rounds For Sale
« Reply #3 on: September 25, 2012, 03:16:10 pm »
its not a diy, but i have installed it myself. Its a purefreedom frame, tank & ro frame, but has the gaps water stainless HF5 4040 and smaller pre filters with 100psi shurflo and cleaning warehouse controller. There is also a Fogwash installed with safefill gas bottle and a cox reel with 100meters of gardiners 6mm thermobore.

it is the 900 2.0 hdi (last of the old face lift model) i think it now has around the 98k mark ive put around twenty on it in the last 18 to 24 months (since i've owned it), it will be serviced and cambelt changed before it goes but will reflect this in its price.

it is a pucka bit of kit but i wont be able to sell it until the round has gone.
how much you want mate?

Any pics you can send me my email is in my profile.

robertphil

  • Posts: 1511
Re: Essex Rounds For Sale
« Reply #4 on: September 25, 2012, 03:50:18 pm »
is any of the colch work on Greenstead or Highwoods ,be intrested if it is

roundbuilder

Re: Essex Rounds For Sale
« Reply #5 on: September 25, 2012, 04:12:31 pm »
id be interested in buying the colchester work if you will split??

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #6 on: September 25, 2012, 04:13:05 pm »
is any of the colch work on Greenstead or Highwoods ,be intrested if it is

the work is based mainly around highwoods, wivenhoe & alresford but there is a very small amount around the old garrison side of colchester.

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #7 on: September 25, 2012, 04:14:00 pm »
id be interested in buying the colchester work if you will split??

ideally i would like to sell it as a whole but if i could get a buyer for the chelmsford/ great leighs side i would quite happily split.

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #8 on: September 25, 2012, 04:15:08 pm »
its not a diy, but i have installed it myself. Its a purefreedom frame, tank & ro frame, but has the gaps water stainless HF5 4040 and smaller pre filters with 100psi shurflo and cleaning warehouse controller. There is also a Fogwash installed with safefill gas bottle and a cox reel with 100meters of gardiners 6mm thermobore.

it is the 900 2.0 hdi (last of the old face lift model) i think it now has around the 98k mark ive put around twenty on it in the last 18 to 24 months (since i've owned it), it will be serviced and cambelt changed before it goes but will reflect this in its price.

it is a pucka bit of kit but i wont be able to sell it until the round has gone.
how much you want mate?
Any pics you can send me my email is in my profile.

there are a few pics on my website of the exterior of the van but i will try and get some pics to you in the next couple of days, needs a wash first ;)

roundbuilder

Re: Essex Rounds For Sale
« Reply #9 on: September 25, 2012, 04:16:59 pm »
id be interested in buying the colchester work if you will split??

ideally i would like to sell it as a whole but if i could get a buyer for the chelmsford/ great leighs side i would quite happily split.
great could you mail me your number  roundbuilder@hotmail.com if you decide to split.
cheers.

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #10 on: September 25, 2012, 04:18:40 pm »
mick mate, my numbers in the add lol

Susan Dean (1stclean)

  • Posts: 2064
Re: Essex Rounds For Sale
« Reply #11 on: September 27, 2012, 12:16:21 am »
ill have the colchester work if you need to split it up , thats if theres a deal to be had

concept

  • Posts: 1048
Re: Essex Rounds For Sale
« Reply #12 on: September 27, 2012, 09:59:06 am »
ill have the colchester work if you need to split it up , thats if theres a deal to be had

Go on Noddy!Get in there, no messing about!


WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #13 on: September 28, 2012, 11:08:27 am »
ill have the colchester work if you need to split it up , thats if theres a deal to be had

Hi Susan, if you want to discuss please feel free to give me a call...

Numbers at the top Cheers Scott (Dean) ;)

WCS Limited

  • Posts: 157
Re: Essex Rounds For Sale
« Reply #14 on: September 28, 2012, 11:12:45 am »
Chelmsford - Provisionally Sold

Colchester - Still Available

Great Leighs & Great Notley - Still Available

N.B Colchester work is due later end of week commencing 8th October
       Great Leighs & Great Notley is due week ending 22nd October


j pearce

  • Posts: 4
Re: Essex Rounds For Sale
« Reply #15 on: September 29, 2012, 09:47:18 pm »
can you text me your price for great leighs mate 07957334181

Susan Dean (1stclean)

  • Posts: 2064
Re: Essex Rounds For Sale
« Reply #16 on: October 28, 2012, 09:21:37 pm »
tryed txing you but no reply ??? give us a shout if you still need to move it on www.bigredmonkey.co.uk

SimonBurton

  • Posts: 84
Re: Essex Rounds For Sale
« Reply #17 on: January 04, 2013, 08:46:01 pm »
is any of the colch work on Greenstead or Highwoods ,be intrested if it is

My sister lives on new part of high woods near rugby club off Maximus Drive..... they have a mare getting great windiest.......

robertphil

  • Posts: 1511
Re: Essex Rounds For Sale New
« Reply #18 on: January 07, 2013, 06:09:46 am »
i clean on Maximus, trad, can give her a look if you want Simon?  bobphillpot@gmail.com