Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: CleanerCarpets on October 14, 2021, 07:39:45 pm
-
Hi John
Hopefully you'll see this.
Is it possible to restrict the wattage of a vacuum motor? As in I'm tinkering at the moment and have 2x 1500 watt motors and an on demand pump on one cord. It's probably just over the 13 amps and I was wondering if there was an inline module of some type that would limit the wattage of one of the motors to bring it down so I'm not quite so close?
-
I have a habit of checking here anyway .
I haven't tinkered with my machines for about a year , il wait for something to break again and that will get me going .
I got a 30 year old TVR , there's way more to go wrong than a portable :D
Il see if i can spot a module , i have never really looked into that , but u should see if you really need it in practice . Another way to lower current draw is by restriction , if you look at an amp meter while using your machine its going to drop while cleaning , fluctuate , so its not like a steady 15amps the whole time .
Personally i would try it and see if your plug gets warm , if not no problems . As long as your plug connections and general wiring are fresh i dont think you'll notice any issue .
-
perhaps this
https://www.amazon.co.uk/Regulator-Stabilizer-Transformer-Temperature-Controller/dp/B075QFQN7S/ref=asc_df_B075QFQN7S/?tag=googshopuk-21&linkCode=df0&hvadid=310808208416&hvpos=&hvnetw=g&hvrand=17174893655225535146&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=20480&hvtargid=pla-378611284747&psc=1
-
Thanks John, that's what I'd found, looks like a voltage controller
I think it's ok as it is but just trying to be careful
From what I understand the single socket is designed to withstand 14 amps constantly and you are right, it's more about the plug on the machine and wiring to it.
I'll maybe just get some 2.5mm cable on the machine and heavy duty plug and keep my eye on it
And TVR - lovely!! I was told TVR stands for Trevor, the bloke who designed them, is that right?
-
Trevor indeed ... although some say it stands for Tow Vehicle Required or Total Vehicle Restoration
yeah , dont think you'll have problem as long as its not a big motor pump with the vacs .
-
Whats the TVR john , chimaera !
-
Whats the TVR john , chimaera !
No before that ... TVR S3 , i kinda like the retro look chimeara would be nice of course though .
-
V6 or V8
-
V6 or V8
I think they made about 200 V8s in that shape ... no i don't have one of those .
The ford 2.9 V6 is fairly bulletproof and its got plenty of go for a light car .... and TVR managed to make it sound pretty good .
https://www.youtube.com/watch?v=OF5yJwK2SUc&ab_channel=NeilS3