Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: James pryer on June 08, 2021, 01:25:21 am
-
Hi all,
Got a job next week to clean a ladies cladding. She has fibre cement cladding that has been painted. What chemical would you recommend using?
I have used Ubix on timber frames before and have seen some of the white frame paint come off. Don’t want this to happen on all the cladding.
I don’t have access to hot wfp.
Would lowering my Ubix ratio work? What to?
Or is screwfix degreaser better?
Thanks
-
You will always get some paint residue come off if the paint is decomposing or flaking
depending on what the staining or dirt is I would use hypo - spray it on leave 10 mins a rinse off at low pressure with a p/w or lightly scrub with wfp
Darran
-
We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .
-
We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .
What strength hypo would you recommend?
-
Go with mild liquid cleaning dishwasher, stay away from abrasive cleaners available in the market.
-
We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .
What strength hypo would you recommend?
7-1 should be ok for green algi
-
Ive used hot wfp with grate results