[WGB]

How much water should i be using for one man using wfp in a day? Ive heard 600 liters can keep 3 men going for 1 day but im using about 500 by myself. 

[gto]

has been covered a loadof times use the search button.

it is all down to you, and how many houses, different types of house/window

[dazmond]

i use around 300-350L A DAY (9AM-4PM)normally although it can be 400L on a longer day.(ive got 2 barrels that take me up to 400L as i have a 350L tank).

i use an aqua-daptor and digital flowcontroller set on 60 and use 100 m of microbore.i do trad some doors and ground floor windows though in tight spaces.

[EandM]

400 litres ish per day  before triggers and just over 200 litres per day since fitting triggers.

[gary999]

200 litres 11-4pm i average around 12 properties more if work is compact

[andrew hamshare]

Limited to 2 x 25litres atm (sadface).
Try to pole the tops and trad the bottoms...saves water and only have to carry my pointy ladder.
Local too so more containers over the coming weeks.

[rg1]

i use around 300-350L A DAY (9AM-4PM)normally although it can be 400L on a longer day.(ive got 2 barrels that take me up to 400L as i have a 350L tank).

i use an aqua-daptor and digital flowcontroller set on 60 and use 100 m of microbore.i do trad some doors and ground floor windows though in tight spaces.

I think you could safely reduce the flow rate and use less water.   Set at 60 seems a bit high.

[dmlservices]

Between 4 - 500 Ltrs per day, but I use a high flow.


Daz

[A & J Owen Window Cleaning]

we use between 80 ltrs and 100. depending what the job is. we do tops wfp and trad the bottoms.

[ben M]

i use around 300-350L A DAY (9AM-4PM)normally although it can be 400L on a longer day.(ive got 2 barrels that take me up to 400L as i have a 350L tank).

i use an aqua-daptor and digital flowcontroller set on 60 and use 100 m of microbore.i do trad some doors and ground floor windows though in tight spaces.

I think you could safely reduce the flow rate and use less water.   Set at 60 seems a bit high.

flow rate set at 45 is enough!

[bobplum]

i use around 300-350L A DAY (9AM-4PM)normally although it can be 400L on a longer day.(ive got 2 barrels that take me up to 400L as i have a 350L tank).

i use an aqua-daptor and digital flowcontroller set on 60 and use 100 m of microbore.i do trad some doors and ground floor windows though in tight spaces.

 i think its just been mentioned but i think 60 is quite high daz,especially for regular cleans,mines 40 but i use fan jets and like you  a aqua adapter

In total i use about 350lts,9.00am till 4.00pm and about 15/17 houses

[ben M]

like Bob said,40 is good, i did a fist clean today at 45 and it was fine!
I leave 45 on regular cleans but could do 40!

[WGB]

Had it at 43 today and used about 600 lts

[rg1]

I have never had mine set higher than 30 and I have never had any problems with spotting.

[dmlservices]

I could use a lower flow , but I find the job then takes longer , I've got  500 ltr tank , so don't have to worry about running out of water.


Daz

[ben M]

how many houses? first cleans or not?

[AuRavelling79]

Had it at 43 today and used about 600 lts

That is a lot for one man.

[dazmond]

60 is fine for me.i like a nice high flow.I very rarely have any problems plus you can work faster IMO.

[ben M]

60 is fine for me.i like a nice high flow.I very rarely have any problems plus you can work faster IMO.

Waste of pure water Daz! 

[Mist A Bit]

I use 400 ltr a day on houses and have used 1000ltr on my marquee cleaning jobs

[WGB]

Done about 10 first cleans yesterday so i used a bit more than normal  but average is about 500 and usualy hav to go home and top up thank. That would be working from 10am -5pm with average amount of houses. Flow rate doesnt seem to be to strong usually hav it betweem 40-45 which makes pencil jet shoot out about 2-3 foot.