Chris R

  • Posts: 813
Recoil 3 - Distributor + info please
« on: August 09, 2004, 02:48:50 am »
Hi again,
Who is the Uk distributor for the recoil 3HP please?

Also can you tell me, if you only run 2 of the vacs and the pump (not the booster) would it run on one power cable? (could be useful on awkward jobs with limited power points).
Does one power lead run the vacs (x3) and the other just the pump, if so, will some form of water heater not work off the same cable?

Thanks
Chris
Staffordshire

Ivar_Haglund

  • Posts: 170
Re: Recoil 3 - Distributor + info please
« Reply #1 on: August 09, 2004, 08:04:35 am »
I got mine direct from the maker

thou it was hard to understand his English.

nice guy

took about 6 weeks for dilivery



IVAR :P

Derek

Re: Recoil 3 - Distributor + info please
« Reply #2 on: August 09, 2004, 10:49:47 am »
Chris

The UK Distributor for the Recoil is...

A & M Cleaning Supplies in Watford

Tel: 01923 671587

Speak to Alan McCane

Cheers
Derek

Dynafoam

Re: Recoil 3 - Distributor + info please
« Reply #3 on: August 09, 2004, 03:40:09 pm »
Chris,

The machine is wired so that one power cable feeds a main motor and the pump, the other feeding the other main motor plus the booster.

This approach is to more evenly distribute the current draw on each cable. Remember that the demands of the pump far exceeds those of a Surflow or Flowjet. Any viable water heater would require a separate feed.

John.

PS. The Recoil distributorship is a separated company, run by Alan's' son, Robert but the number given by Derek will reach him.

Ed Valentine

  • Posts: 183
Re: Recoil 3 - Distributor + info please
« Reply #4 on: August 09, 2004, 04:52:09 pm »
Thanks to all above.

---Hope I can appropriately answer this question without deletion(??)---


The distributor is:
Cleaning Support Ltd. at: 01923 330034

Alan, Robert, or Lee McKane are there to service you.

They are terrific individuals with the very best in mind for their customers.

(Thanks, John B. for that information/clarification)
Good Fortune to all;
Ed Valentine
cross-american corp.

Dynafoam

Re: Recoil 3 - Distributor + info please
« Reply #5 on: August 10, 2004, 01:44:07 am »
Chris,

I thought I had answered that one - with a negative.

Two or three power cords are really not a problem - I've been working that way for years. BTW, I have yet to trip a CB with the Recoil + Steamate.

John.

Glynn

  • Posts: 1129
Re: Recoil 3 - Distributor + info please
« Reply #6 on: August 10, 2004, 01:49:01 am »
Chris,
Why bother buying from the states when you can buy UK machinery with US motors in it (you can only draw 13amps from a 13 amp supply) and this draws almost 13 amps ! think about it. If you want more power then truckmouts the ony way.
http://www.extracta.co.uk/exel.htm
Regards
Glynn