Terry A

  • Posts: 144
cleaning block paving
« on: October 15, 2015, 08:14:05 am »
when cleaning block paving how much muck should I blast out between the pavers?
Should I be blasting as much as I can away or just down 15 or 20 mm?

Thanks

Terry

Kev Martin

  • Posts: 6954
Re: cleaning block paving
« Reply #1 on: October 15, 2015, 09:30:59 am »
Have you ever tried it with a Mono Rotary?
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Terry A

  • Posts: 144
Re: cleaning block paving
« Reply #2 on: October 15, 2015, 10:51:29 am »
Mono rotary? is that the same as a flat surface cleaner?

Kev Martin

  • Posts: 6954

chris scott

  • Posts: 3414
Re: cleaning block paving
« Reply #4 on: October 16, 2015, 02:52:39 pm »
20mm will be fine….Forget the mono rotary stick with the flat surface cleaner.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Neil Jones

  • Posts: 1592
Re: cleaning block paving
« Reply #5 on: October 16, 2015, 07:43:16 pm »
Kevin I'm still to see a video anywhere off anyone of a drive being cleaned with a rotary. I should really try on mine and see. What brush would you recommend, I can do a comparison.

Kev Martin

  • Posts: 6954
Re: cleaning block paving
« Reply #6 on: October 16, 2015, 07:55:48 pm »
What is your drive made of?
What rotary do you have?
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Smurf

  • Posts: 8538
Re: cleaning block paving
« Reply #7 on: October 17, 2015, 07:11:09 pm »
WTF "mono rotary" on block pavers yer having a laugh surely  ;D

Smurf

  • Posts: 8538
Re: cleaning block paving
« Reply #8 on: October 17, 2015, 07:19:22 pm »
This is the quick & messy way to deep clean block pavers properly  ;D

https://www.youtube.com/watch?v=sIfOVx6oJJU


stevon

  • Posts: 126
Re: cleaning block paving
« Reply #9 on: October 17, 2015, 07:24:12 pm »
is it easy or difficult using a buffing machine on block paving & what pad are you using? you don't seem to be giving much away?? ::)roll

Smurf

  • Posts: 8538
Re: cleaning block paving
« Reply #10 on: October 17, 2015, 07:27:51 pm »
You could always use me weed wagga matey  ;D
https://www.youtube.com/watch?v=V5vprOlw-x0

Smurf

  • Posts: 8538
Re: cleaning block paving
« Reply #11 on: October 17, 2015, 07:31:36 pm »
Who need a pressure washer anyhow if you got a hose and a lot of time on yer hands  ;D
https://www.youtube.com/watch?v=EZid3FJ6CHU

Neil Jones

  • Posts: 1592
Re: cleaning block paving
« Reply #12 on: October 17, 2015, 08:27:24 pm »
Kev 17 inch Victor weighted if needed. Tynex, monster, soft, medium brush.

Comparison on my mono block drive, half that way, half with my FSC 21 lt 250 bar p/w.

I know which will be quicker and easier and give a better finish. The thought of having to wet vac and rotary a drive makes me want to cry though.

Kev Martin

  • Posts: 6954
Re: cleaning block paving
« Reply #13 on: October 18, 2015, 05:02:31 pm »
WTF "mono rotary" on block pavers yer having a laugh surely  ;D

Why?  Have you tried it?
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Smurf

  • Posts: 8538
Re: cleaning block paving
« Reply #14 on: October 18, 2015, 11:27:14 pm »
WTF "mono rotary" on block pavers yer having a laugh surely  ;D

Why?  Have you tried it?


No....Show us a vid then as I'm intrigued to know now Kevin

stevon

  • Posts: 126
Re: cleaning block paving
« Reply #15 on: October 19, 2015, 04:22:05 pm »
kevin can you post more info ???& pic please

trevor perry

  • Posts: 2454
Re: cleaning block paving
« Reply #16 on: October 20, 2015, 03:11:48 pm »
WTF "mono rotary" on block pavers yer having a laugh surely  ;D

Why?  Have you tried it?

Kevin you have promised to put a video up of this method in action in the past but still you havnt until you put this video where your mouth is I am calling bullpoop
better to remain silent and be thought a fool than to speak out and remove any doubt

Kev Martin

  • Posts: 6954
Re: cleaning block paving
« Reply #17 on: October 20, 2015, 03:47:40 pm »
WTF "mono rotary" on block pavers yer having a laugh surely  ;D

Why?  Have you tried it?

Kevin you have promised to put a video up of this method in action in the past but still you havnt until you put this video where your mouth is I am calling bullpoop

Trevor

I am sorry you feel like that but you have the freedom of speech to say what you want!

However, when we were pressure washing on a regular basis using Falch 300 Bar F2's and T3's (machines using more power, heat and flow rate that few have experienced) we trialled a rotary cleaner against these pressure washers which were fitted with Mosmatic FSC's with Vacuum Take Off and the Mono Rotary did a better job!  "That is a fact"

I am not a great one on making videos or publishing pictures in fact,  I have never published any pictures of our work on this forum.  So essentially your thoughts and opinions are just that!  Whether you believe me or not does not make one jot of difference to me either way.  That said,  we do not currently have a decent pressure washer or an FSC to make a comparison and produce a video.  I am in the process of purchasing one from Ben and once I have it I will make every endeavour to make a video of the process.  However, if you think about it carefully how can something that is relying on pressure and heat do a better job than something that is mechanically cleaning?  Does a wfp do a better job than a trad WC?  Can a gutter vac do a better job than a man up close doing it mechanically?  Can you clean a conny roof better with a WFP or soft scrub?  Can a drive in car wash clean a car better than I can do it by hand?  It really is just common sense at the end of the day.  You also need to be aware that at no point have I said it is quicker all I said is it does a better job and it is a lot less mess and no clean up!

Kevin
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

chris scott

  • Posts: 3414
Re: cleaning block paving
« Reply #18 on: October 20, 2015, 05:51:12 pm »
I have to admit …i'm with Trevor on this .
I think you are talking out of your ring . When "I " clean block I make sure we take out at least 20 mm of sand and replace with Virgin sand. This is necessary when sealing (you cannot seal dirt ) and a matter of "principle" when "just cleaning". No brush hair/bristle/fibre will "reach" down into the gap between  herringbone or interlock  pavoirs.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Jettaway

  • Posts: 521
Re: cleaning block paving
« Reply #19 on: October 20, 2015, 06:43:23 pm »
Kev,
Can you not just make a video of cleaning block paving with a mono rotary.  Im sure we can all imagine how to clean with a pressure washer from experience.