Pages: [1]

mark dew

  • Posts: 2901
Glue for Loose gooseneck??
« on: July 24, 2006, 05:09:36 pm »
The gooseneck on my 18ft glass fibre pole is loose and swivels around if i have it at an angle.
I am thinking of using superglue or similar to get it secure again.
Will this or any particular glue be ok to bond fibreglass and aluminium or will it do any damage?
cheers

mark
Logged

jouk45

Re: Glue for Loose gooseneck??
« Reply #1 on: July 24, 2006, 05:46:37 pm »
can you not use plumb tape round it, would give it a tight fit, plus its water proof, you need to watch what glues you use, if you have to take it back of, or would a hose clip not tighten it,
Logged

steve m

  • Posts: 796
Re: Glue for Loose gooseneck??
« Reply #2 on: July 24, 2006, 06:26:09 pm »
you need a epoxy glue. anything like araldite, or b+qdo a good one its a rapid dry version and is useable after 1/2 hour
Logged

Alex Gardiner

  • Posts: 7740
Re: Glue for Loose gooseneck??
« Reply #3 on: July 24, 2006, 07:07:35 pm »
Hi Mark,

you need two-pack epoxy resin, give us a call if you need some.

Alex Gardiner
Logged

Chris Cottrell

  • Posts: 3162
Re: Glue for Loose gooseneck??
« Reply #4 on: July 24, 2006, 07:39:01 pm »
or do as I did screw it together with a self taper ;D
Chris
Logged

Morph

Re: Glue for Loose gooseneck??
« Reply #5 on: July 24, 2006, 08:39:00 pm »
Homebase now do a really good one in a double tube, easy to use, superglue and araldite mix.
Logged

mark dew

  • Posts: 2901
Re: Glue for Loose gooseneck??
« Reply #6 on: July 24, 2006, 10:05:09 pm »
thanks all.
There is a homebase near me, i will go there in the morning.
cheers

mark
Logged

jeff1

  • Posts: 5855
Re: Glue for Loose gooseneck??
« Reply #7 on: July 24, 2006, 10:11:44 pm »
Try Gripfill its a very strong glue
Logged
Pages: [1]