Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: wightsurf on July 25, 2006, 09:00:55 pm

Title: flushed ro-di unit 6hrs opps
Post by: wightsurf on July 25, 2006, 09:00:55 pm

does anyone know if this apart from waste a lot of water will have damaged my unit at all  ???
I'm not sure as my readings have changed a bit ,i have chaned the resin but still reads 01 was 00 before this .Is it just the resin keeping the tds down ?

regards

Martin

Title: Re: flushed ro-di unit 6hrs opps
Post by: JM123 on July 25, 2006, 10:05:55 pm

it won't have damaged the ro - just cleaned it really well!!

Title: Re: flushed ro-di unit 6hrs opps
Post by: Trevor Knight on July 26, 2006, 09:03:14 am

Don't panic, no damage done as far as I am aware.

If your reading is 01 after resin have you checked the reading pre - resin?

This is the reading that matters most as you will see more about what is happening with your RO filters etc...

You have just changed your resin the reading should be 000 at least for a while anyway.

Have a look at the water from the RO, will give you more idea whats going on.

Best wishes,

Trev