[H h20]

I`m looking for a couple of replacement poles "without the brush and hose",i know gardiner pole systems do them but is there anywhere else?,Cheers,Gaz

[s.hughes]

What about the unger poles? Wintec do them.

Steve

[H h20]

What about the unger poles? Wintec do them.

Steve

I`m using them now,i want the poles with the clamps not the thread,Gaz

[genesis_windows]

brodex sell just poles.

[H h20]

Ive` just put this together,what do you think,Gaz

[s.hughes]

Gaz, Where did you get the pole from?

Steve

[H h20]

Gaz, Where did you get the pole from?

Steve

I got it from my local supplier,Gaz

[ScrimShady]

looks good gaz!! i am very interested in how you set it up and where you got it from.
you can email me on richa479@aol.com or ring 07784039497

[neil100]

Where is rhe brush head from Gaz.

Nel

[H h20]

Where is rhe brush head from Gaz.

Nel

It`s from my local cleaning supplier,they don`t come as a wfp brush i just drill a couple of small holes remove a few bristles and fit a couple of 4mm jets,i`ve always used these brushes on my poles they are perfect and very affordable,Gaz

[neil100]

What was the total cost to build Gaz?

How long did it take you?

Nel

[H h20]

What was the total cost to build Gaz?

How long did it take you?

Nel

It cost me about £40 all in,but thats with my discount,and it took about half an hour to do,Gaz

[Jeff Brimble]

Gaz seen the tip in this http://www.cleanitup.co.uk/smf/index.php?topic=15080.0

[H h20]

Gaz seen the tip in this http://www.cleanitup.co.uk/smf/index.php?topic=15080.0

Ye thanks Jeff,im just testing it out to see if i like the hose on the outside as ive always had the hose running inside,ive found some plastic clips that are used for wet and dry cleaners for holding the hose to the pole they seem to be doing the trick,i`ll be using it tomorrow to see how it goes,Gaz

[thewindowcleaner1]

Like the pole is that a two section one if so can you get Three x 6ft ones ??
Also can you buy the clamp section seperate ??
Can you buy the clamp parts seperate ??

I prefer hose up the centre of pole less thing dangling in the wind, less to catch anything and break..

[H h20]

Like the pole is that a two section one if so can you get Three x 6ft ones ??
Also can you buy the clamp section seperate ??
Can you buy the clamp parts seperate ??

I prefer hose up the centre of pole less thing dangling in the wind, less to catch anything and break..

A up Alan,nice to see you back,
the pole is only avaliable in a 2x2 meter and no spares
but www.gardinerpolesystems.co.uk do poles to your requirement and spares to,im going to be ordering one from there ,Gaz

[neil100]

Gaz,

Can you post another pic of the trigger you have at the bottom of your pole?

Can you explain how you attached trigger and were to buy?

Nel.

[H h20]

Gaz,

Can you post another pic of the trigger you have at the bottom of your pole?

Can you explain how you attached trigger and were to buy?

Nel.

Neil,heres a couple of pics of the trigger and how it`s attached to pole and connects to hose,
it`s off a numatic wet n dry carpet cleaner, the connectors are pro push fit and i use 6mm hose and then about 6ft of 4mm hose that goes to the trigger connector with a very small piece of 6mm hose to connect together and a push fit connector,
i would not do with out a trigger i find it`s so easier and the water is on and off at my control,
if you need anymore info just ask,Gaz

[H h20]

Neil did you look at the trigger?,Gaz

[Nick_Thompson]

Hi Gaz

I have a sack barrow type trolley with a 40 p.s.i. pump, 7 AH battery, micro chip flow control and it carries two 25 lts containers.

The problem is that the sack barrow is not man enough for the job.

I’ve also thought about upping the pump and battery.

It looks like you have already done this with the same sack barrow I was thinking of using.

I would be really interested in how you went about building yours.

A picture would be just too kind.

Thanks. 

Nick.

[H h20]

Hi Gaz

I have a sack barrow type trolley with a 40 p.s.i. pump, 7 AH battery, micro chip flow control and it carries two 25 lts containers.

The problem is that the sack barrow is not man enough for the job.

I’ve also thought about upping the pump and battery.

It looks like you have already done this with the same sack barrow I was thinking of using.

I would be really interested in how you went about building yours.

A picture would be just too kind.

Thanks. 

Nick.

Have a look at the "my wfp on a budget" topic,mines not the first one  :,it`s lower down,Gaz

[neil100]

Gaz, I did it looks great. I do not know were to source all the parts including trigger.

Can you tell me if your brush head will fit on these standard plastic adapters that I use with my vikan brush?

Nel

[H h20]

Gaz, I did it looks great. I do not know were to source all the parts including trigger.

Can you tell me if your brush head will fit on these standard plastic adapters that I use with my vikan brush?

Nel

Neil,i got the triggers from a mate of mine who owns a washer,vaccum etc sales and repair shop, the ones i use are the older type and he`s going to look into it if he can get the new ones,
as for the brush it doesn`t have a thread in it i use a tapered adaptor that pushes in and i secure it with a small self tapper screw and then i put an angle addaptor on the pole then put the brush on,Gaz

[H h20]

My new 38 footer will be arriving tomorrow from gardiner pole systems,im too excited to go bed (sad or what),but i`ll probabaly be too tired tomorrow to use it  ,Gaz