Pages: [1]

supernova77

  • Posts: 3547
004 TDS
« on: June 13, 2006, 09:14:58 am »
Hello All,

At the end of last week my TDS reading out of the RO/DI units was 001... I left it thinking its ok i'll change my resin over the weekend. I went to change it yesterday and it was reading 004, and my stored water in the water butt was also at 004.

Do you reckon I should use the water for cleaning windows and just rinse a bit more, or will it cause me problems?

Cheers, Andy.
Logged

Peter Fogwill

  • Posts: 1415
Re: 004 TDS
« Reply #1 on: June 13, 2006, 09:44:10 am »
Andy,  The water is fine at 4ppm, you can use it with a reading much more than that before you would ever see spotting on the glass.  No need to rinse any more than usual either.

Peter
Logged

Trevor Knight

  • Posts: 1825
Re: 004 TDS
« Reply #2 on: June 13, 2006, 12:04:33 pm »
Hi Andy,

I change resin at 015 - 020 tds

Sure you wont have a problem with this at 004

best wishes,

Trev
Logged
Covering Hampshire, Dorset, Surrey, Berkshire

supernova77

  • Posts: 3547
Re: 004 TDS
« Reply #3 on: June 13, 2006, 12:26:43 pm »
Thanks for your replies guys!  ;)
Logged

Paul Coleman

Re: 004 TDS
« Reply #4 on: June 13, 2006, 06:06:43 pm »
Quote from: Southern Cleaning Services on June 13, 2006, 09:14:58 am
Hello All,

At the end of last week my TDS reading out of the RO/DI units was 001... I left it thinking its ok i'll change my resin over the weekend. I went to change it yesterday and it was reading 004, and my stored water in the water butt was also at 004.

Do you reckon I should use the water for cleaning windows and just rinse a bit more, or will it cause me problems?

Cheers, Andy.

I was cleaning with water at 006 until yesterday without any problems.  I'm back on 000 again now though as I've got a few first cleans coming up.  I don't know if I was told correctly but I understand that a climbing TDS is not such a good idea on first cleans.
Logged
Pages: [1]