Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Steve Grocott on May 13, 2022, 11:08:12 pm
-
Doing a pressure wash in a couple of weeks on a driveway, which has a fair amount of rust stains on it (from a skip I think). Best solution to use to remove? Appreciate any replies.
-
Rust is never the easiest - I have some f9 barc which is excellent if you can get it otherwise I’ve used oxylic acid - my advice is to go a day or so before and treat stains leaving the solution on then you can pressure wash off on the day - hot better than cold but this way your giving yourself a fighting g chance
Darran
-
Thanks Darran, that’s good info’👍
-
Rust is never the easiest - I have some f9 barc which is excellent if you can get it otherwise I’ve used oxylic acid - my advice is to go a day or so before and treat stains leaving the solution on then you can pressure wash off on the day - hot better than cold but this way your giving yourself a fighting g chance
Darran
I would rather do rust than oil spills 😂😂😂
-
Oxi clenze ..Ben's Soft Wash
-
Thanks Rob👍
-
Oil is a breeze - got a biggie coming up I’ll post some pictures
Darran
-
Oil is a breeze - got a biggie coming up I’ll post some pictures
Darran
What do you use and will it remove it 100% so that when it’s dry there is no scaring ?? I have always struggled to get it to a point that Ime happy with , looked at this the other week it’s dirty engine oil didn’t want to take the job on as the guy wanted it to look like new and was concerned it would leave Staines (http://www.cleanitup.co.uk/smf/1652631608_75A6CC09-26FA-41C0-BC9D-154CE2FE38C5.jpeg)(http://www.cleanitup.co.uk/smf/1652631608_02280AF6-4402-4F87-8034-94A2A4B30FA4.jpeg)(http://www.cleanitup.co.uk/smf/1652631608_05ED8EFB-827E-4F22-9809-7897BF3C2E44.jpeg)
-
Is that tarmac or concrete ? Sorry I can't quite tell from the photo,
Yes I agree if it's on tarmac then it's more of a problem - basically I either use OT-8 for most surfaces or the TA version for tarmac as you know your pretty much guaranteed to scar tarmac/ashphelt so I make this clear and add in the cost of a coat of tarmac paint
All other surfaces I get 100% clear I also find things like wd40 and brick acid will remove residue oil and blend - it is a bit more finesse than normal cleaning but hey it makes life interesting 🤩
Darran
-
Is that tarmac or concrete ? Sorry I can't quite tell from the photo,
Yes I agree if it's on tarmac then it's more of a problem - basically I either use OT-8 for most surfaces or the TA version for tarmac as you know your pretty much guaranteed to scar tarmac/ashphelt so I make this clear and add in the cost of a coat of tarmac paint
All other surfaces I get 100% clear I also find things like wd40 and brick acid will remove residue oil and blend - it is a bit more finesse than normal cleaning but hey it makes life interesting 🤩
Darran
Thanks Darran , it’s concrete and it’s very dirty engine oil I have always shied away from oil spills we are that busy just don’t need the extra hassle 😂😂😂
-
don't mind a little hassle when your getting 1K+ for the job ;D
Darran
-
don't mind a little hassle when your getting 1K+ for the job ;D
Darran
Hummmmmm maybe that’s my problem not charging enough for this kind of work .😂😂😂
-
I think you might jut be right ;D