Pages: [1]

Ben Lugg

  • Posts: 207
Ceramic Tiles
« on: February 27, 2012, 08:42:44 pm »
Hi,
can you use Ultrapac Renovate (prochem), on ceramic tiled floors and if so do you need to neutralise with an acidic product after scrubbing and wet vacuuming.

Many thanks.

Ben.
Logged

Kev Martin

  • Posts: 6954
Re: Ceramic Tiles
« Reply #1 on: February 28, 2012, 07:30:55 am »
Ben

What are you trying to do?  What is the problem?

Kev
Logged
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Ben Lugg

  • Posts: 207
Re: Ceramic Tiles
« Reply #2 on: February 28, 2012, 08:34:34 am »
Got to do a large tiled kitchen floor short notice and only have carpet cleaning chemicals on board till thursday. Tiles are ok condition and ceramic, grout not too bad either.

Cheers.
Ben.
Logged

Kev Martin

  • Posts: 6954
Re: Ceramic Tiles
« Reply #3 on: February 28, 2012, 08:54:25 am »
Ben

If you are sure they are ceramic and not porcelain the job is simple as dirt cannot penetrate the glaze so it will all be surface only.  Pre wet the floor and scrub with a high alkaline cleaner.  Allow it to dwell then extract and rinse and extract again.

Kev Martin
Marble Life Ltd
Logged
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Jamie Pearson

  • Posts: 3407
Re: Ceramic Tiles
« Reply #4 on: February 28, 2012, 01:40:07 pm »
Ultrapac will be fine.

Its a pH 10.5

Just needs a good rinse.
Logged

Ben Lugg

  • Posts: 207
Re: Ceramic Tiles
« Reply #5 on: February 28, 2012, 04:13:53 pm »
Thanks for the replies, job done this afternoon and achieved a good result.

Cheers.
Ben.
Logged
Pages: [1]