Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Steve Grocott on February 29, 2020, 11:51:20 pm
-
Hey everyone, I have a recently got a Honda GX390 outfit with a Mazzoni pump. I can reduce pressure at the lance by throttling down the engine or by turning down the control on the pump. I’ve got a decking cleaning job coming up and I know this needs a lower pressure. What is the best way to lower the pressure at the lance? I’m operating out of a wheelie bin and the pump has 2 bypass hoses connected to the wheelie bin. Any advice would be appreciated!
-
I always adjust the pressure at the unloader valve.
-
Thanks for that👍
-
Use a bigger jet on the lance, decking does not need lower pressure, just a more careful approach.
Even use the same jet but keep your distance from the wood
-
Thanks Mike, I only have a turbo lance and a vario lance so I’ll set my vario to wide. Fsc no good?
-
Yes just set it to wide and do multiple passes rather that try and clean it in one go, I find it when you stop that you get a problem, just start at one end and clean the full length.
A FSC is harder to clean evenly with you tend to get circles as you stop & start but be careful and it can be done
-
Thanks Mike, appreciate the advice👍