Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: john63. on May 19, 2018, 06:15:45 pm
-
Fitted new spindle on hose reel as was leaking bad
So took it all to bits fitted new spindle put back together
Tested it ok for leaks but now when I stop it on controller then restart pump not kicking in unless I take of hose connector then put it back on it works
Any suggestions
Thanks
Was ok before
-
Try caliberating the pressure on the control unit.
-
Happens all the time when i have to disconnect the main hose, you have trapped air in it. Its an easy fix if you have a strainer before pump. Turn pump on and slightly undo the lid on the strainer till the water comes gushing through and then obviously retighten.
-
Happens all the time when i have to disconnect the main hose, you have trapped air in it. Its an easy fix if you have a strainer before pump. Turn pump on and slightly under the lid on the strainer till the water comes gushing through and then obviously retighten.
I did not know that, cheers