[♠Winp®oClean♠]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

[Pope vader]

to small, might wait for the extreme version

[Mike #1]

might get one to add to my gardiners collection

[richard jagger]

I do like the look of this brush. Gardener are using there heads again.

[Erithwc]

i was going to buy a xtreme brush but i might have to wait and see what the reviews are like on this one 

[Paul Coleman]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

[wpclean]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

[Alex Gardiner]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

[boshravie]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

Hi Alex
I love these new super light brushes, i have two already. Its just I would have loved to have them In fan jet as well as pencil jets, would you do anything like this in future?

[Alex Gardiner]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

Hi Alex
I love these new super light brushes, i have two already. Its just I would have loved to have them In fan jet as well as pencil jets, would you do anything like this in future?

I will email you tomorrow about the Fanjet strategy.

[windiewasher]

Alex when will these sill brushes be on sale? How much for?
Cheers

[Alex Gardiner]

Alex when will these sill brushes be on sale? How much for?
Cheers

Drop me an email to alex@agardiner.co.uk and I can let you know more details. 

[boshravie]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

Hi Alex
I love these new super light brushes, i have two already. Its just I would have loved to have them In fan jet as well as pencil jets, would you do anything like this in future?

I will email you tomorrow about the Fanjet strategy.

Great Many thanks 

[s.w.c]

i like the look of it,

[gary999]

about bloody time! will be one of my first purchases
when the insurance pay up!

[Paul Coleman]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

Anyone in particular?  It's hard to know who you are referring to if you don't quote the post.

[wpclean]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

Anyone in particular?  It's hard to know who you are referring to if you don't quote the post.

Sorry I thought it would be easy . . . . . my mistake  :

[♠Winp®oClean♠]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

[Alex Allen]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

[windiewasher]

Your full of manure.
Aeriel brushes are garbage

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

[Blue Frog Systems]

Alex. - im not suprised you came out with that last comment. To be honest i was waiting for it like EVERY other time !!

Ive never had a gardiners brush fall apart on me.

Ive used bayersan & brodex poles. The bayersan was HEAVY and whippy at height. The brodex poles caused massive pain in my shoulder to the point i could not work for a week. I was on high dosage pain killers that only just scratched the surface of the pain i was in.

Then i changed over to a gardiners pole. Within a day of working, the pain had gone copmpletley.

Ive had this gardiners pole for about 6 months now and i havent had a single problem with it. The problems you mention arent to do with gardiners, but the people in the factory where they are made. Gardiners sort any problems out asap.

Finally i would like to point out that gardiners dont slate the competition. They dont need to like some

Personally you i think you just make a tit of yourself each time you try an attack on gardiners and i find it quite funny

[dd]

Your full of manure.
Aeriel brushes are garbage

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

I thought you liked the ariel brush and posted that it was better than the gardiners brush.

I haven't tried one but the new gardiners brush does look similar with the extra splay and red bristles.

[Alistair@AWC]

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

I can confirm that as I remember Alex telling me about at least 18 months ago, although its been that long I thought the lightweight sill brush had been shelved!

[♠Winp®oClean♠]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

That maybe why Virtually no one uses Aerial brushes & gardiners can't keep up with demand! Nuff said?

[Perfect Windows]

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

Hi Alex,

Just interested (as I've had a quick look through a few of your recent posts): Is there any view you have that can be summarised other than "Gardiners Bad, Aerial (or in fact anyone but Gardiners) Good?"

Is there any grey in your world, or is it all black and white?

Vin

[Count Phil]

Will the top part be available dual trim, if you see what I mean. I like dual trims but could do with the sill bit too.

[Alex Gardiner]

Will the top part be available dual trim, if you see what I mean. I like dual trims but could do with the sill bit too.

We could do this 

We are in the middle of deciding exactly which bristle types and configurations work best on this ready for production.

[SPE]

about time there was an lightweight alternative to a vikan sill brush, now I'm just waiting for one with a built in spring loaded swivel

[Alex Gardiner]

about time there was an lightweight alternative to a vikan sill brush, now I'm just waiting for one with a built in spring loaded swivel

Why spring loaded?

[♠Winp®oClean♠]

about time there was an lightweight alternative to a vikan sill brush, now I'm just waiting for one with a built in spring loaded swivel

Why spring loaded?

Indeed, this would prevent you rinsing off while working at an angle & keeping the brush in-line with the window.

[Paul Coleman]

Alex. - im not suprised you came out with that last comment. To be honest i was waiting for it like EVERY other time !!

Ive never had a gardiners brush fall apart on me.

Ive used bayersan & brodex poles. The bayersan was HEAVY and whippy at height. The brodex poles caused massive pain in my shoulder to the point i could not work for a week. I was on high dosage pain killers that only just scratched the surface of the pain i was in.

Then i changed over to a gardiners pole. Within a day of working, the pain had gone copmpletley.

Ive had this gardiners pole for about 6 months now and i havent had a single problem with it. The problems you mention arent to do with gardiners, but the people in the factory where they are made. Gardiners sort any problems out asap.

Finally i would like to point out that gardiners dont slate the competition. They dont need to like some

Personally you i think you just make a tit of yourself each time you try an attack on gardiners and i find it quite funny

It's disgraceful.  I had the socket of a Gardiner's brush break on me a couple of years ago.  It was only 20ft in the air at the time when the pole blew over.  I thought those sockets could take a drop of at least 40ft.
Here's the funny bit though.  When I phoned up to order some more bits, I asked if they could sell the socket as a separate.  They happily threw it in FOC.  I told them what happened and that it was me at fault but they let me have it anyway.

[Mike #1]

Thats gardiners for great customer service have bought from them for over 2yrs now and no complaints whatsoever 

[SPE]

about time there was an lightweight alternative to a vikan sill brush, now I'm just waiting for one with a built in spring loaded swivel

Why spring loaded?

Indeed, this would prevent you rinsing off while working at an angle & keeping the brush in-line with the window.

I tried adding a swivel joint a while back to help me get into the corners of the lower panes in traditional sash windows. Although it worked I found it a compromise as the rest of the time the swivel would flop about when I did'nt nescessarily want it to, annoying and in the end I binned it. Its quite easy to angle pencil jets to rinse the corner of glass, less so to get a brush into the corners of sash frames when you need to scrub.
Indeed , my requirements would'nt appeal to the mass market  :

[♠Winp®oClean♠]

about time there was an lightweight alternative to a vikan sill brush, now I'm just waiting for one with a built in spring loaded swivel

Why spring loaded?

Indeed, this would prevent you rinsing off while working at an angle & keeping the brush in-line with the window.

I tried adding a swivel joint a while back to help me get into the corners of the lower panes in traditional sash windows. Although it worked I found it a compromise as the rest of the time the swivel would flop about when I did'nt nescessarily want it to, annoying and in the end I binned it. Its quite easy to angle pencil jets to rinse the corner of glass, less so to get a brush into the corners of sash frames when you need to scrub.
Indeed , my requirements would'nt appeal to the mass market  :

That's the trouble with the plastic swivels which are available just now- you can't set the tension/resistance. They are aslo mass produced for use with sweeping brooms & so it's hit or miss whether you get a tight one or loose one.

When you use one where the tension can be "set" you have it so that it swivels very freely but has just enough "nip" so that it doesn't flop when you lift it from the glass.

If you are using the said white ones which Gardiners sell at the moment, you can drill a small hole (3mm or so) through the ball & socket & fit a thin bolt through with a lock nut on the other end. However, you need to select a free moving unit first!

[♠Winp®oClean♠]

Oh, & the lighter the brush, the better the swivel experience- Xtreme brushes were born to swivel!

[SPE]

Oh, & the lighter the brush, the better the swivel experience- Xtreme brushes were born to swivel!

yes it was one of the said white ones, thanks for the advice something I may look into when the new sill brush is out

[boshravie]

http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SL_RADIUS_SILL.html

Now that's more like it.  Something like that was urgently needed as, due to the angle,  many sills were not cleanable while using the carbon gooseneck.  Not sure if it was an oversight that is being hastily overcome or if it was always planned that way and there was a delay with the brushes.
All we need now is a superlight cladding brush for a full set   .

No this is not an oversight hastily overcome - The Radius-Sill brush project has been in development for just over 2 years now! We would have liked to have this project sorted a long time ago. In fact the carbon gooseneck and the 90 degree plastic socket were both developed primarily for this brush - they just took a lot less time to get to market.

Hi Alex
I love these new super light brushes, i have two already. Its just I would have loved to have them In fan jet as well as pencil jets, would you do anything like this in future?

I will email you tomorrow about the Fanjet strategy.

Didnt get that e mail Alex ?   

[thermoclean]

Looking good, brush is long overdue. Still not biggest fan of the slx clamps but
How anyone can say that the super lite brushes aren't lightyears ahead of the rest
I don't know. And please don't mention bayersan there stuff is awful.

[Alex Gardiner]

Didnt get that e mail Alex ?   

That is because I have only just sent it  - thanks for the reminder.

[Pope vader]

alex gardiner

will there be a wide version liek the extreme wide

[Alex Gardiner]

alex gardiner

will there be a wide version liek the extreme wide

No plans as yet - lets see how this one goes down and then who knows 

[Pope vader]

i think it will be a good seller,

[boshravie]

Didnt get that e mail Alex ?   

That is because I have only just sent it  - thanks for the reminder.

Whaaaaaaaa thanks for the reply Alex, I am defiantly looking forward  to get of them as soon as you have got them in stuck  , I am glad you like the videos 

Many thanks 

[s.w.c]

i think it will be a good seller,

me too

[Alex Allen]

Your full of manure.
Aeriel brushes are garbage

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

I thought you liked the ariel brush and posted that it was better than the gardiners brush.

I haven't tried one but the new gardiners brush does look similar with the extra splay and red bristles.

it does look a bit similar to the aerial brush
but the splay is way over the top, half of it wont touch the window unlike the aerial brush what do you think winproclean  
oh by the way the aerial brush cleans sills just fine without the stock touching the sill
gardiners are still playing catch up    

[Lee GLS]

Alex, the aerial brush is rubbish at cleaning sills, i dont know why they class it as a sill brush because it definitely isnt!

[Erithwc]

Your full of manure.
Aeriel brushes are garbage

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

I thought you liked the ariel brush and posted that it was better than the gardiners brush.

I haven't tried one but the new gardiners brush does look similar with the extra splay and red bristles.

it does look a bit similar to the aerial brush
but the splay is way over the top, half of it wont touch the window unlike the aerial brush what do you think winproclean  
oh by the way the aerial brush cleans sills just fine without the stock touching the sill
gardiners are still playing catch up    

why do you waste your breath no one on here takes any notice all you ever do is promote the aerial brush and put down gardiners and other brush makers  : :

plus gardiners do get complaints on here but i if you 're selling in large numbers you will have a certain amount of complaints

Alex Gardiner can i have a discount on the new sill brush when its released now please  

[Perfect Windows]

it does look a bit similar to the aerial brush
but the splay is way over the top, half of it wont touch the window unlike the aerial brush what do you think winproclean  
oh by the way the aerial brush cleans sills just fine without the stock touching the sill
gardiners are still playing catch up    

Amazing how you can judge a brush without even using it or seeing it in the flesh?

Oh, of course you can, it's from Gardiners, so it must be rubbish.

(I must add that I have no idea if it's good or not.)

Vin

[♠Winp®oClean♠]

Your full of manure.
Aeriel brushes are garbage

Can I ask respectfully if you are in any way connected to gardiners ?
If you are not you should ask for a serious commision.

No, not in any way apart from using their gear. YES, you are right, I should be on commision!


I am a Gardiners fan, that's it basically mate. I've been wfp over 7 years & been sold some real rubbish in that time by various suppliers. I was getting fed up with all the crap out there. When Gardiners released the first SLX 4 years ago I got one. At this moment I knew this company DID know what they were on with, such was the relief to get a product that actually exceeded my expectations & so I followed their progress & continued to buy the best products available!

what you winproclean, never would have know
there not the best quality
with the huge number of faults posted on here
it makes them worse than brodex or bayersan
and their brushes are not as good as the vikan
their just cheap light brushes that fall apart
thats ok for you your expectations are low  

I thought you liked the ariel brush and posted that it was better than the gardiners brush.

I haven't tried one but the new gardiners brush does look similar with the extra splay and red bristles.

it does look a bit similar to the aerial brush
but the splay is way over the top, half of it wont touch the window unlike the aerial brush what do you think winproclean  oh by the way the aerial brush cleans sills just fine without the stock touching the sill
gardiners are still playing catch up    

Well spotted, your knowledge knows no bounds Alex. That's the point dude, half of it is not meant to touch the glass!!

IT'S A PROPER SILL BRUSH, SEE? :

I enjoy the entertainment factor of you Alex, keep up the good work!

[Perfect Windows]

That's the point dude, half of it is not meant to touch the glass!!

IT'S A PROPER SILL BRUSH, SEE? :

I think you'll find that with an Aerial brush, all of it cleans the window and all of it cleans the sill at the same time due to quantum duality built into every one.

Vin

[♠Winp®oClean♠]

That's the point dude, half of it is not meant to touch the glass!!

IT'S A PROPER SILL BRUSH, SEE? :

I think you'll find that with an Aerial brush, all of it cleans the window and all of it cleans the sill at the same time due to quantum duality built into every one.

Vin

It does the laundry & washes the dishes too so I hear.

[Blue Frog Systems]

Alex. my SL dual trim flocked cleans the windows and the sill without the stock touching the sill

Its all about the angle

[Nameless Drudge]

If you read the splurge that comes printed with the aeriel brush it tells you to use a different brush for an initial clean and then swap over to the red one to finish so as not to get the red one "contaminated".

Yet this red brush is sold as a sill brush and in practice wiping sills must be the finest way to contaminate any brush, it certainly is for me and i clean windows(and sills) for a living.

 I dont think this brush was designed or tested by a working window cleaner,i`ve cut off the very sharp corners of the stock and fixed some draught excluder cushion to the edges of mine to make it safer to use. Make no mistake the rock  hard stock and its rock hard very sharp pointed edges are a liability.It does have a lovely soft glide on the glass but at the end of the day i have to scrub the dirt  off  the glass not stroke it to orgasm. I get some windows where thats probably all thats required but they would be in the minority.

[jouk45]

brilliant alex, just what i have been waiting for, 

[richard jagger]

Aerial brush Alex I would defo not buy a aerial brush just because you have one. I have nothing in common with your views you remind me of a 6 year old one kid crusader.