Pages: [1] 2  All

macmac

Salmon (gaz) brushes & mk II swivel suppliers listed
« on: July 17, 2007, 06:24:10 pm »
Out of the goodness of my heart :-* & after DAYS of searching, for anyone wanting gaz brushes etc.


www.cleanstore.co.uk

www.vastsupplies.co.uk

These are two suppliers of salmon products
I've used the second one (vastsupplies). Phone them though as if you order on-line there's a minimum delivery charge of 10 quid. over phone he'll post at cost. mk II swivels 1.69 inc vat.

You may have to search through the sites but they are on there.

tony
Logged

pylofm

Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #1 on: July 17, 2007, 07:37:51 pm »
Ok I have found ther swivels http://www.vastsupplies.co.uk/product.php?productid=3883&cat=0&page=1

But where are the brushes?

Dave
Logged

Spruce

  • Posts: 8367
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #2 on: July 17, 2007, 07:41:40 pm »
Couldn't find the brushes either
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

Bazzy1999

  • Posts: 986
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #3 on: July 17, 2007, 07:42:24 pm »
Logged

Bazzy1999

  • Posts: 986
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #4 on: July 17, 2007, 07:45:04 pm »
Logged

pylofm

Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #5 on: July 17, 2007, 07:53:58 pm »
Do the swivels fit vikan type threads....sorry to sound stupid..

Dave.
Logged

Bazzy1999

  • Posts: 986
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #6 on: July 17, 2007, 07:57:34 pm »
mine does
Logged

pylofm

Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #7 on: July 17, 2007, 07:58:44 pm »
Thanks ...Bazzy...
Logged

macmac

Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #8 on: July 17, 2007, 08:37:35 pm »
Quote from: pylofm on July 17, 2007, 07:53:58 pm
Do the swivels fit vikan type threads....sorry to sound stupid..

Dave.

Yes.
Logged

jeff1

  • Posts: 5855
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #9 on: July 17, 2007, 08:40:20 pm »
I found the Mk1 swivel much easier to master than the Mk2 version, I wish I could find a link for the Mk1 version.

But thanks MacMac for the link to the brushes, I will be buying some  ;)

I like this brush http://www.vastsupplies.co.uk/product.php?productid=3838&cat=93&bestseller

It reminds me of the sill brush being sold at at a much higher price and probably half the weight.
Logged

Jeff Brimble

  • Posts: 4347
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #10 on: July 17, 2007, 08:50:52 pm »
You may find the bristles are all at the wrong angles.
Logged

jeff1

  • Posts: 5855
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #11 on: July 17, 2007, 08:53:42 pm »
Jeff, Wouldn't the angle adaptor compensate for that?
Logged

Jeff Brimble

  • Posts: 4347
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #12 on: July 17, 2007, 09:09:20 pm »
Dont think so, saw one once. You could fit the sawn off unger swivel as I have done with a few, but you need a light brush. I dont think it is light.
Logged

Jeff Brimble

  • Posts: 4347
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #13 on: July 17, 2007, 09:10:57 pm »
On second thoughts pretty sure the bristles are wrong but someone needs to buy one to find out, so why not. I could be completely wrong.
Logged

macmac

Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #14 on: July 17, 2007, 09:15:34 pm »
Vastsupplies also sell the angle adaptors (exactly the same as from wfp suppliers) for 2.49 inc vat

ooops, the swivels are 1.67 inc vat & not 1.69 as said earlier, 2p :o

They tend to be cheaper than cleanstore.

tony
Logged

jeff1

  • Posts: 5855
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #15 on: July 17, 2007, 09:42:21 pm »
Tony do you have the phone number for vastsupplies? I had a look and can't see it on there site. I'll give them a call tomorrow and order a brush.
Logged

dai

  • Posts: 3503
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #16 on: July 17, 2007, 09:45:10 pm »
I was going to place an order, £10 postage for 4 small items costing a tenner is well over the top. Don't think I'll bother, Dai
Logged

Bazzy1999

  • Posts: 986
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #17 on: July 17, 2007, 09:46:35 pm »
Jeff its right in front of you its on the grey search bar (far right) 01707 645505

Logged

jeff1

  • Posts: 5855
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #18 on: July 17, 2007, 09:49:22 pm »
Quote from: dai on July 17, 2007, 09:45:10 pm
I was going to place an order, £10 postage for 4 small items costing a tenner is well over the top. Don't think I'll bother, Dai
Thats what Tony was saying phone them and the p&p will be cost and not a tenner.

Quote from: Bazzy1999 on July 17, 2007, 09:46:35 pm
Jeff its right in front of you its on the grey search bar (far right) 01707 645505


Thanks Baz
I haven't got my glasses on 8) Well thats my excuse Lol Just a few largers down the line ;D
Logged

Bazzy1999

  • Posts: 986
Re: Salmon (gaz) brushes & mk II swivel suppliers listed
« Reply #19 on: July 17, 2007, 09:50:49 pm »
a few??
Logged
Pages: [1] 2  All